English
中文
Français
Deutsch
Italiano
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Трансмиттеры дифференциального давления серии KDP210
KDP210 Дифференциальный передатчик давления с выходом 4-20mA защитой IP65 и ЖК-дисплеем
KDP210 Differential Pressure Transmitter Product Overview Measurement Media Air, neutral gases, dry gases, and other gases Range Minimum ±25 Pa / 0-25 PaMaximum 0-10 kPaCommon ranges: ±100 Pa, ±1000 Pa, ±10000 Pa0-0.125～1.5 kPa Output Signal 4-20mA (2/3-wire), 0-5V (3-wire), 0-10V (3-wire), RS485 (Modbus RTU) Power Supply 16-30VAC/DC (3-wire); 18-30VAC/DC (2-wire) Accuracy ±1% F.S Protection Rating IP65/NEMA4 Display LCD backlit display Applications HVAC and Energy Management
Трансмитер дифференциального давления KDP210
2 Wire 4-20mA ABB Differential Pressure Transmitter Sensor For Pharmaceutical Clean Rooms Description The differential pressure transmitter is a transmitter that measures the pressure difference between the two ends of the transmitter, and outputs standard signals (such as 4~20mA, 0~5V). Differential pressure transmitters are different from general pressure transmitters in that they have 2 pressure interfaces. Differential pressure transmitters are generally divided into
Передатчик дифференциального давления KDP210Q
KDP210Q 0-10V LCD display differential pressure transmitter for HVAC Description KDP210Q series differential pressure transmitters are available with and without screen for customers to choose from with high precision, ultra-low & adjustable range, fast response characteristics.The cable connector adopts M16*1.5 to tighten the threaded port, which is not only effective in protecting against water and dust, but also suitable for multi-size cables. Feature Ranges from -25/+25Pa
Заменяемый дифференциальный передатчик давления из серого камня с защитой IP65
Resplaceable greystone differential pressure transmitter Description Differential Pressure (DP) transmitters measure the difference between two pressures. They use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side. The DP level transmitter reading can be either negative or positive depending on whether the low-side or high-side is the larger value. A DP transmitter can be used as
Ручной датчик перепада давления воды тарировки подгонял
water differential pressure sensor Description Differential pressure sensor is a device for measuring pressure or differential pressure. It usually consists of two sensitive diaphragms close to each other. When the pressure of the measured medium changes the distance between the two diaphragms slightly, the corresponding electrical signal will be generated on the sensitive diaphragm. This kind of sensor using direct contact to measure pressure is called pressure sensor; The
